Polycom ReadiManager SE200, Operator'S Manual

Page: 33 / 72

Managing Active Conferences
4–7
Figure 4-4 Dial Settings Dialog Box
7 In the Dial Settings dialog box, make any desired changes to settings and
click
OK . For details, see Table 4-3.
8 Click Update in the Add Participants dialog box.
9 Click Close .
Name The name of the local resource.
Dial Type Specifies how this video endpoint is accessed: through IP or ISDN.
Device The name of the device.
Dial Options If you select Dial-In, you must communicate the dial-in number and
pass code to the participant you have added.
Note: If MMPC or IVR is not enabled on the MGC, you must look up
this information in MGC Manager.
Speed The connection speed the device uses for the conference.
Set as Host
Site Select this check box to set this resource as the host site for the
conference.
Adding a Guest (External Participant)
You can add a guest (external participant) to an active conference. A guest is a
user or room that is associated with a device that is not managed by
ReadiManager.
Note: If guests need assistance, advise them to contact you by telephone.
Table 4-3 Fields in Dial Settings Dialog Box
Field Description