Polycom ReadiManager SE200 Operator'S Manual Download Page 69

Page: 69 / 72

Troubleshooting

7–9

Conference On Demand Problems and Solutions

Dialing a Conference On Demand
fails.
Inviting other endpoints into a
conference using the CON service
fails.

The endpoint dials a CON service,
and the call is rejected because of
one of the following:

•

The MGC is not registered or is
offline.

•

ReadiManager cannot log into
the MGC.

•

The MGC has no resource
available for the call.

•

The MGC’s IP address is not
entered in ReadiManager.

•

Check the diagnostics log for an
ARJ reason from this endpoint.

•

Verify that the MGC card is
registered with ReadiManager
and is online.

•

Verify that the MGC cards
registered with ReadiManager
have the MGC’s IP address
filled out in the Devices list.

•

Verify that the MGC login ID and
password for the CON service
are correct.

•

Verify that the H.323 network
service that the MGC is using is
set as the default service.

•

Verify that the MGC has enough
available resources to start this
conference.

•

Verify that the LocalDS dialing
rule is enabled and the action
setting is route.

•

Verify that the device policy bit
rate limit has not been
exceeded.

•

Verify that the CON service is
enabled. Go to

Administrator

View > Dial Plan Setup >
Services

Problem

Description

Solutions

Summary of Contents for ReadiManager SE200









































































Search results

Summary of Contents for ReadiManager SE200

Reviews:

Related manuals for ReadiManager SE200

Brands by name

Popular brands

Polycom ReadiManager SE200, Operator'S Manual

Search results

Summary of Contents for ReadiManager SE200

Reviews:

Related manuals for ReadiManager SE200

Brands by name

Popular brands