Polycom ReadiManager SE200 Operator'S Manual Download Page 54

Page: 54 / 72

Polycom ReadiManager SE200 Operator’s Guide

5-16

Intersite links are part of the network topology. Information about them is

entered in the ReadiManager Administrator View.
To view the Monitoring Network Intersite Links screen, choose

Monitoring >

Network Intersite Links

. The Monitoring Network Intersite Links screen

updates status every three seconds.

About the Monitoring Network Intersite Links Screen

For details, see Table 5-10.

Figure 5-11

Monitoring Network Intersite Links Screen

Table 5-10

Information in the Monitoring Network Intersite Links Screen

Column Description

Intersite Link Name

Name of the intersite link as defined in Directory
Services.

# of Calls

Number of calls occurring over an intersite link.

% Bandwidth Used

Percentage of the maximum bandwidth available being
used by all calls on the intersite link

Average Bit Rate

Average bit rate for all calls over the intersite link.

Summary of Contents for ReadiManager SE200









































































Search results

Summary of Contents for ReadiManager SE200

Reviews:

Related manuals for ReadiManager SE200

Brands by name

Popular brands

Polycom ReadiManager SE200, Operator'S Manual

Search results

Summary of Contents for ReadiManager SE200

Reviews:

Related manuals for ReadiManager SE200

Brands by name

Popular brands