Poly G7500 Administrator'S Manual Download Page 2

Page: 2 / 119

Contents

Before You Begin................................................................................................6

Audience, Purpose, and Required Skills.............................................................................6
Related Poly and Partner Resources..................................................................................6

Getting Started................................................................................................... 8

Poly Partner Mode Overview.............................................................................................. 8
Product Overview of Poly Video Systems...........................................................................8

Administrator Features and Capabilities................................................................ 10

Powering the System On and Off......................................................................................10
Navigating the System...................................................................................................... 10

Access the System Web Interface..........................................................................10

Setting Up the System..................................................................................... 11

Overview of Poly G7500, Studio X50, and Studio X30 Hardware.....................................11

Poly G7500 System Ports.......................................................................................11
Poly Studio X50 System Ports............................................................................... 12
Poly Studio X30 System Ports............................................................................... 13

LED Status Indicators....................................................................................................... 14

LED Status Indicators for the G7500 System.........................................................14
LED Status Indicators for the Studio X50 and Studio X30 Systems...................... 15

Completing Initial System Setup....................................................................................... 16

Registering the System with Poly Lens.................................................................. 17
Complete Setup with the System Web Interface....................................................17
Complete Setup with Provisioning..........................................................................18

Managing Peripheral Devices........................................................................................... 18

Configuring General Settings......................................................................... 28

Name the System and Room............................................................................................ 28
Provide Contact Information..............................................................................................28
Set the Date and Time...................................................................................................... 29

Summary of Contents for G7500
























































































































Search results

Summary of Contents for G7500

Reviews:

Related manuals for G7500

Brands by name

Popular brands

Poly G7500, Administrator'S Manual

Search results

Summary of Contents for G7500

Reviews:

Related manuals for G7500

Brands by name

Popular brands