2.
On your remote control, press
Mute
for seven seconds.
In Poly Video Mode, the screen displays either a successful or unsuccessful pairing notification. In
Partner Mode, the blue LED indicator stops blinking blue and returns to white.
3.
Depending on the pairing result, do one of the following:
▪
Successful pairing
: The remote control is ready to use. You can view the remote control
name, battery level, and status of the device in the system web interface.
▪
Unsuccessful pairing
: Try the following solutions:
◦ Remove the batteries from the remote control and reinsert after 5 seconds.
◦ Move your remote control closer to the system than other remote controls and try to
pair again.
Unpair a Remote Control
You can unpair a remote control if you no longer want to use it with your system.
Procedure
1.
In the system web interface, go to
Remote Control
.
2.
Select
Unpair Remote
.
The remote control unpairs.
IP Microphones
You can use a combination of IP-based Polycom table and ceiling microphones with your G7500 system.
These microphones also support Polycom Acoustic Fence technology.
The Studio X50 and Studio X30 don’t support IP microphones.
You can connect up to three of the following microphones directly to your system:
▪ Poly IP Table Microphone
▪ Poly IP Ceiling Microphone
Related Links
on page 68
Factory Restore a Table Microphone
Setting Up the System
23
