2.
Under
Revocation
, select
Delete
next to the CRL you want to delete.
Disable the Polycom Content App Port
To prevent the Content App from connecting to your system and providing a video and audio content
stream, disable the content sharing application in the system web interface.
This option stops TCP/TLS traffic on port 5001.
Procedure
1.
In the system web interface, go to
General Settings
>
System Settings
.
2.
Clear the
Enable Poly Content App Sharing
check box.
3.
Select
Save
.
System Allow List
The allow list enables access to your system web interface and SNMP ports only to IP addresses you
specify.
An allow list supports up to 30 addresses (including IPv4 and IPv6 formats) and can only be configured in
the system web interface.
Note:
If your IP addresses are dynamically assigned, make sure the allow list is updated so those hosts
can connect to your system.
Add IP Addresses to the Allow List
You can add and edit specific IP addresses to an allow list for your system.
Warning:
Once you save the IP allow list, you can access the system web interface of only those
devices on the list. If your current device isn’t on the list, you can’t access the system web
interface for that device. You may have to factory restore the system to regain access.
Procedure
1.
In the system web interface, go to
Security
>
Access
.
2.
Select
Enable Allow List
, then
Edit Allow List
.
3.
Select address type
IPv4
or
IPv6
.
4.
In the
IP Address
field, enter the address of the system you want to add to the allow list.
5.
Select
Add
.
6.
Optional: Repeat steps 4 and 5 for the other IP addresses you want to add to the allow list.
7.
Select
Save
.
Securing the System
58
