Poly G7500, Administrator'S Manual

Page: 49 / 119

Procedure
1. In the system web interface, go to Security > Local Accounts .
2. Configure the following settings:
Setting Description
Admin ID The local administrator account name (default is
admin
).
Room Password You must enter this password to change
administrator settings in the local interface.
The default password is the last six characters of
the serial number listed in
System Details and on
the back of the device.
Remote Access Password If you disable Use Room Password for Remote
Access , you must enter this password to access
the system web interface.
This password lets you perform device
management tasks, such as updating the system’s
software.
Use Room Password for Remote Access Enable this option to also use the room password
for remote logins.
Disable this option to require a separate password
for remote logins.
3. Select Save .
Related Links
Complete Setup with the System Web Interface on page 17
Configure Account Lockout Settings
Account lockout controls prevent unauthorized access to your system.
Procedure
1. In the system web interface, go to Security > Local Accounts .
2. Configure the following settings (your changes save automatically):
Setting Description
Lock Admin Account after Failed Logins Specifies the number of failed login attempts
allowed before the system locks the account. You
can turn this setting
Off .
Admin Account Lock Duration Specifies the amount of time an account is locked
because of failed login attempts. After this period
expires, the system resets the failed login attempts
counter to zero, and users can again log in with
that account.
Securing the System
48