LED Status Indicators for IP Microphones
Use the LED on the IP table and ceiling microphones to get information on the state of each device.
IP Microphone LED Status Indicators
Indicator
Status
Solid then blinking white
Powering on
Solid red
Muted microphone
To avoid distraction, the ceiling microphone doesn’t display red when muted.
Solid green
In a call and microphone not muted
To avoid distraction, the ceiling microphone doesn’t display green in a call.
LED is off
Out of a call and microphone not muted
Alternating blinking and solid
amber
Update in progress
Blinking amber
Factory restore in progress
Blinking blue
Ready to pair
Solid blue
Paired successfully
Poly Microphone IP Adapter
The Poly Microphone IP Adapter lets you connect non-IP Polycom audio devices with your system. For
example, if your Polycom microphone uses a Walta-Walta cable, you can connect it to your system
through the microphone adapter.
The Studio X50 and Studio X30 don’t support the microphone adapter.
See the latest video system
Release Notes
for which audio devices work with the microphone adapter.
Note:
You can’t use the microphone adapter with IP microphones connected to your system.
Related Links
Factory Restore a Microphone Adapter
on page 102
Configuring the Microphone Adapter
on page 73
Setting Up the System
25
