CAUTION!
The coolant circuit is normally drained for
transport. Make sure that it is topped up before starting the
engine.
18- Take off the protection cap (photo No. 13) and check
the oil level (See section
4.3
).
19- Fit the gear lever (photo 14).
20- Fill the fuel tank (See section
4.16
).
INTRODUCTION
Always ensure that the motorcycle has been efficiently
serviced and check it over before riding it. Take your
motorcycle to an authorised POLINI MOTORI dealer for all
major servicing and repair.
Because of the manufacturer's policy of continuous
development, and because of constant innovations in
technology, your motorcycle may differ in some details from
what described in the illustrations and text in this manual.
Original POLINI MOTORI spare parts are always made of
the same materials and in the same way as the parts
originally fitted on your minicross motorcycle to ensure a
longer life and improve efficiency to your motorcycle.
Always use original POLINI MOTORI spare parts.
2. STARTING THE ENGINE FOR THE FIRST TIME
Always check over your motorcycle thoroughly before
starting the engine. To start the engine for the first time,
proceed as instructed below.
1- Remove the radiator filler cap.
2- Fill the cooling system with coolant up to the top rim of
the radiator (photo 12). Wait a few minutes for the
coolant to circulate through the system. Top up the
radiator as necessary if the coolant level drops.
3- Screw the radiator filler cap back on tightly.
4- Before starting the bike, check that the gear is at the
neutral position (photo No. 15, gear N)
5- Open the fuel cock located under the fuel tank: position
ON (photo 16).
5
ENGLISH
12
13
14
10
11
15
N
1°
2°
3°
4°
5°
6°
XP65R_instructions.qxd 5-09-2007 10:45 Pagina 5
