66
PDC 2000/3000 Repair Manual
Diagnostics and Troubleshooting
•
Black tape over IO PC board (SCSI connector) to prevent debris from entering camera
(Figure 4-2E).
Note:
If black masking tape present, make sure it does not interfere with the
power jack connector.
•
Tape securing optical flex to front end PC board (Figure 4-2F).
•
Foam pad on strobe capacitor (Figure 4-2G).
•
All flex cables for tears, breaks, poor connection (not seated properly or locked), etc.
Notes:
•
If necessary, use a jewels magnification loop to visually inspect any or all
of the flex cables.
•
Camera connectors have locking tabs which secures its flex cable
in place. To remove a flex cable, first pull back the two locking tabs
and pull it free of the connector. When installing a flex cable
align it in the connector and make sure it is fully seated (not skewed)
before pushing in the two locking tabs.
