PDC 2000/3000 Repair Manual
Diagnostics and Troubleshooting
65
Figure 4-1. Camera top cover removed
3. Once the top cover is properly opened, inspect for the following (Figure 4-2) before
attempting to make any repair of the camera.
•
Black masking tape placed on bottom cover to prevent sonar (transducer) connections
from shorting to bottom cover (Figure 4-2A).
•
Black masking tape placed between rear lens and shutter to prevent light from leaking
into camera (Figure 4-2B).
•
Black masking tape placed on the side of the strobe lamp to prevent seeing the
shiny side of strobe when the camera is closed (Figure 4-2C).
•
Foam pad placed between bottom cover screw post and flex to prevent flex from
shorting to bottom cover (Figure 4-2D).
Foam Pad
Top Cover
Lens Assembly
Eyecup Assembly
Padded Work Area
PDC3000 has a card slot in
Bottom Chassis assembly.
Bottom Chassis
Assembly
