56
PDC 2000/3000 Repair Manual
Testing & Adjustment
14. Once the adjusted focus gear information is written into the camera’s EEPROM, park the
camera as explained in the Park test.
15. Run the Fast Flatness test.
Note: Make sure that the peak values are changed to the current peak values before
running test.
16. Re-park the camera again.
17. Run the Peak Tweak test.
18. Re-park the camera again.
19. Re-run the Fast Flatness test.
Notes: •
If the Peak Tolerances/Location high point is at 42+\- 4, camera focus OK.
•
If the Peak Tolerances/Location high point is not at 42+\- 4, camera out of
focus, repeat Dime Store test procedure .
