34
DMC Repair Manual
Parts Replacement
Vanity Panel (Figure 2-10)
Removal
1. Remove the four (4) screws that secures the front panel to the top and bottom extrusion.
2. Gently pull out the front panel just far enough not to disconnect the CCD and shutter flex.
3. Slide out the vanity panel from the channel in the top extrusion.
Figure 2-10. Replacing vanity panel
Installation
1. Slide the replacement vanity panel into the channel in the top extrusion.
2. Install and tighten the four (4) screws that secures the front panel to the top and bottom
extrusion being careful not to damage or crimp the CCD and shutter flex.
3. Secure the decal to the indent on the vanity panel. Place it close to the rear panel.
Vanity Panel
Front Panel
Top Extrusion
Bottom Extrusion
Decal
Summary of Contents for Digital Microscope Camera
Page 5: ...1 Camera Overview...
Page 13: ...2 Parts Replacement...
Page 37: ...3 Testing and Adjustment...
