6.14
9926813 R04 - 2013-2016
RZR
570 Service Manual
© Copyright Polaris Industries Inc.
SERVICING - NO DIFFERENTIAL
TRANSMISSION DISASSEMBLY
NOTE
Refer to the exploded view at the end of this chapter as
a reference.
1.
Place
the
transmission
in
High
gear
before
disassembly.
2.
Drain and properly dispose of the transmission
lubricant (see Chapter 2 – Transmission Lubrication,
page 2.25).
3.
Remove the bellcrank nut (A) and bellcrank (B).
4.
Remove the E-clip (C) that retains the spring washer
(D), flat washer (D) and gear switch (E). Remove the
switch.
5.
Remove the sector cover bolts (F) and remove the
sector cover (G).
NOTE
Removal can be aided by using your thumbs to press in
on the shafts while pulling out the cover with your
fingers.
6.
Remove the compression spring (H).
7.
Remove the detent star (I). Note how the detent star
fits onto the splined shaft with the raised edge facing
outward for reassembly.
8.
Remove the spacer (J).
9.
Remove the shift shaft (K), detent pawl (L) and the
shift sector gears (M and N).
NOTE
Note the timing marks on the shift gears (M and N) for
reassembly purposes.
10. Remove the O-rings (P) from each shaft and discard.
Use new O-rings upon assembly.
