EN
OperatiOn
1900_EN-Einsatz_2860
- 25 -
075-09-05
2,0 cm
340-13-43
- The inner tines should just sweep over the ground
(approx. 2.0 cm) depending on fodder amount.
- Adjust the working height to the ground conditions.
- The fodder becomes dirty and the swath is damaged
if the setting is too low.
- Check the setting frequently during operation.
4. Setting the distance of the outer feeler
wheel
1. Loosen both clamps (1, 2).
2. Push the stop over the desired anchor (3, 4, 5)
3. Tighten both clamps (torque)
1
2
3
4
5
5. Aligning the indicators
Requirement:
Rake height of both rotors is set to the same height.
4
5
1. Align the height indicator (4) on both rotor units.
a. Open hose clip (5) underneath the rotor unit
b. Align the height indicator arrow (4) with the one on
the other rotor unit.
c. Re-tighten hose clip (5).
The indicators should now show the same on the left
and right rotors.
