- 14 -
1900-DE_Anbau_2860
EN
aTTaching The machine
General safety information
DANGER
Risk of death - in the event of unpredictable
movements of tractor or machine
•
Park the machine only on firm, level ground.
•
Secure the tractor against unintentional
rolling.
•
Turn the engine off.
•
Remove the key.
•
Secure the machine against tipping using
supports (1).
Attaching the machine
WARNING
Risk of serious injury through crushing when coupling
the machine to the lower linkage.
•
When coupling to the lower linkage, take
particular care not to become wedged or
caught in between.
NOTE
material damage due to lateral movement of the device
in the mounting frame.
•
Adjust the limiting chains and stabilizers of
the lower links in such a way that no lateral
stability of the attachment is possible.
NOTE
Property damage through improperly attaching the
machine.
•
Mount the chassis frame horizontally to the
tractor's lifting gear.
1. Couple the headstock on the tractor:
- Switch off PTO shaft
- Attach headstock to the lower link of the tractor
- Properly secure coupling pin
- Position chassis frame correctly
2. Fold up support stand
CAUTION
Risk of injury from improperly mounted machine.
•
The machine may fall to the ground when
the support leg is removed. Check that the
implement and tractor are properly connect-
ed.
- Unlock support stand from the bolt
- Push support stand down with your foot and fold up
CAUTION
Risk of injury through raised support stand
•
Mind the self-opening support stand
when unlocking it.
- The bolt engages automatically
3. make electrical connections
Lighting:
- Attach 7-pin plug to tractor (E3)
- Check that the lighting functions on the machine
Single rotor operation (variant):
- Couple the 2-pin plug on the tractor
4. Connect hydraulics
- Place lever on tractor control unit at floating position
(0)
- Ensure clean plug connections
- Connect hydraulic hoses
- Install the cord (Standard) or the cable and the control
unit (single-rotor variant) in the tractor cabin
