EN
TransporT
1700_EN-TRANSPORT_2860
- 19 -
Frame - chassis
The frame chassis is steerable. The swivelling headstock
transfers the steering movement to the frame chassis
using a steering rod.
In the optimum basic setting, the frame chassis is trailed flush
to the tractor when driving straight ahead. (See illustration)
The steering rod length can be re-adjusted if the implement
does not trail flush.
The adjustment unit is located on the headstock.
1. Loosen the locknut (1)
2. Remove splint (3) and loosen nut (3) at start of
steering rod - directly behind the tractor.
3. Pull steering rod up and away.
4. Turn the spindle (2) until the required steering axle
position is reached.
1
2
3
5. Re-fit ball joint
A Spindle (2) must be screwed in.
B Spindle (2) must be screwed out.
M
044-01-009
A
B
machine dimensions in transport
position
The following dimensions will not be exceeded if the
transport position is established correctly:
Type
H e i g h t
(m)
Width (m) l e n g t h
(m)
TOP 662 wide
chassis
4.00
2.90
8.10
T O P 6 6 2
n a r r o w
chassis
4.00
2.55
8.10
Reducing transport height:
T r a n s p o r t
height
Condition
4.06 m
Swath apron retracted but not
folded in
4.00 m
Swath apron folded in
3.50 m
Tines removed and safety hoop
folded out
This height cannot be reached with
a mechanical swath curtain.
