EN
OperatiOn
1900_EN-Einsatz_2860
- 32 -
Adjust the curved track
The cam track can be adjusted if grass is left lying outside
the swath.
1. Park the machine on an even surface and secure it
against rolling off. (Use wheel chocks)
2. Take the three plastic plugs (1) from the openings on
the underside of the rotor unit to gain access to the
screws (2) on the curved track system.
1
3. Loosen the three screws (2) on the cam track.
4. Adjusting the cam track: Turn the rotor unit by the tine
arms and adjust the cam track in the slot, so that the
fodder is gathered more effectively.
2
5. Tighten the three screws (2).
6. Reinsert the plastic stoppers (1) in the openings.
7. Carry out a test run. Repeat the procedure until you are
satisfied with the result.
