Pleora Technologies iPORT CL-GigE, User Manual

Page: 59 / 118

Connecting to the CL-GigE and Configuring General Settings Using eBUS Player 49
Chapter 9
Connecting to the CL-GigE and Configuring General
Settings Using eBUS Player
After you have set up the physical connections to the CL-GigE, you can start eBUS Player to configure
image settings, which will help ensure that images are received and displayed properly. You can also
configure the buffer options to reduce the likelihood of lost packets.
The following topics are covered in this chapter:
•
“Confirming Image Streaming” on page 50
•
“Providing the CL-GigE with an IP Address” on page 52
• “Configuring the CL-GigE with an Automatic/Persistent IP Address” on page 52
•
“Accessing your Camera Settings through Camera Link Serial Communications” on page 54
•
“Configuring CL-GigE Image Settings Using eBUS Player” on page 55
• “Enabling SafePower and PoCL” on page 58
•
“Viewing and Testing Streaming Images” on page 60
•
“Configuring the Buffers” on page 61
• “Specifying How Images are Acquired” on page 62
•
“Implementing the eBUS SDK” on page 66
BEFORE you attempt to stream images, you must know the image settings of your Camera Link camera,
and then configure the CL-GigE with matching image settings.