87
System Troubleshooting
Changing to the Backup Firmware Load
In the event that the main firmware load fails to start, the CL-GigE will start up using the backup
firmware load when it is restarted or power cycled.
In the rare event that the backup load is not used automatically (as indicated by the fact that eBUS Player
will not be able to detect the CL-GigE), you can use the slide switch to change to the backup load.
After the CL-GigE starts up using the backup load, you can apply a firmware update to the CL-GigE to
recover the main load. For more information see the
Updating Pleora Firmware
knowledge base article on
the Pleora Support Center (
Main load position (OFF)
Backup load position (ON)
FPGA Board (Back View)
SW1 Slide Switch