Planmeca Compact i Touch v2 User Manual Download Page 189

Page: 189 / 314

3. Press Instrument light.

A pop-up window opens.

4. Adjust the light intensity.

The minimum value is 70% of the maximum intensity and the maximum

100%, and the adjustment step is 2.
After reaching the minimum value the light is switched off.

5. Press OK.

The pop-up window closes and the new values are displayed on the

control panel.

25.4.6 Bien-Air MCX micromotor

About this task

Changing the instrument spray, chip blow and LED values for the Bien-Air

MCX micromotor follows the normal programming pattern. For more

information, see sections "Instrument spray" on page 176, "Automatic chip

blow" on page 178 and "Instrument light" on page 178.

CAUTION

Before modifying the torque and RPM functions, please refer to the file

manufacturer’s instructions concerning torque and RPM value

recommendations for the files.

Steps

1. Activate the micromotor.
2. Press Torque.

The micromotor's drive mode is automatically set to Auto stop. This

means, that when the torque limit is reached, the micromotor stops. No

other drive modes are available for the Bien-Air MCX micromotor.

3. Press Program.

4. Press RPM limit to adjust the micromotor speed rate.

A pop-up window opens.

25 Programming

User's manual

Planmeca Compact i 179

Summary of Contents for Compact i Touch v2



























































































































































































































































































































Search results

Summary of Contents for Compact i Touch v2

Reviews:

Planmeca Compact i Touch v2, User Manual, Page: 189 / 314

Search results

Summary of Contents for Compact i Touch v2

Reviews: