Planmeca Compact i Touch v2 User Manual Download Page 55

Page: 55 / 314

The tray table is attached to the instrument console with a quick-connector,

enabling an easy attachment and detachment of the tray table.

10.5.4 Rotating tray table

The rotating tray table is placed on top of the instrument console and is

available for side deliveries. The maximum load on the tray table is 2

kilograms (4.4 lbs).
You can rotate the tray table 180° to the desired position.

10.5.5 Double tray

The double tray is available for side deliveries. It is a combination of the top

tray table and the rotating tray table. The maximum combined load on the

tray tables is 2 kilograms (4.4 lbs).

10 Instrument system

User's manual

Planmeca Compact i 45

Summary of Contents for Compact i Touch v2



























































































































































































































































































































Search results

Summary of Contents for Compact i Touch v2

Reviews:

Planmeca Compact i Touch v2, User Manual, Page: 55 / 314

Search results

Summary of Contents for Compact i Touch v2

Reviews: