Planmeca Compact i Touch v2 User Manual Download Page 17

Page: 17 / 314

6 Symbols on product labels

Date of manufacture (Standard ISO 7000).

SGS listing marking according to US and Canadian standards (ANSI/AAMI

ES60601-1 and CAN/CSA C22.2 No. 60601- 1).

Type B applied part (Standard IEC 60417).

Type BF applied part for specified dental instruments (Standard IEC 60417).

Alternating current (Standard IEC 60417)

On/Off switch (Standard IEC 60417).

Refer to instruction manual/booklet (Standard ISO 7010).

General warning (Standard ISO 7010).

Warning, crushing hazard: hand (Standard ISO 7010).

Warning, hot surface (Standard ISO 7010).

Warning: Electricity (Standard ISO 7010).
To avoid risk of electric shock, this equipment must only be connected to a

supply mains with protective earth.

Health hazard (acc. to EC regulation no. 1272/2008).

6 Symbols on product labels

User's manual

Planmeca Compact i 7

Summary of Contents for Compact i Touch v2



























































































































































































































































































































Search results

Summary of Contents for Compact i Touch v2

Reviews:

Planmeca Compact i Touch v2, User Manual, Page: 17 / 314

Search results

Summary of Contents for Compact i Touch v2

Reviews: