Planmeca Compact i Touch v2 User Manual Download Page 42

Page: 42 / 314

8.11 Planmeca ProX X-ray unit

The Planmeca ProX X-ray unit can be mounted to the dental unit pylon.

CAUTION

Drive the chair carefully when positioning the ProX X-ray unit.

CAUTION

Do not drive the chair during the exposure.

CAUTION

Do not touch the external PC and the patient at the same time.

CAUTION

Move the ProX X-ray unit behind the pylon when it is not being used.

For more information about Planmeca ProX, see Planmeca ProX User’s

Manual.

8.12 Planmeca intraoral scanner

The intraoral scanner can be placed in the Flexy-holder.

8 Planmeca Compact i dental unit

32 Planmeca Compact i

User's manual

Summary of Contents for Compact i Touch v2



























































































































































































































































































































Search results

Summary of Contents for Compact i Touch v2

Reviews:

Planmeca Compact i Touch v2, User Manual, Page: 42 / 314

Search results

Summary of Contents for Compact i Touch v2

Reviews: