manualshive.com logo in svg

Planmeca Compact i Touch v2, User Manual, Page: 91 / 314

Share
Download
Planmeca Compact i Touch v2 User Manual Download Page 91

15  Switching unit on and off

The on/off switch (1) is located at the rear of the unit base. Press the switch

to turn the unit on. Press the switch again to turn the unit off.

When the unit is switched on, the on/off switch light is on.

NOTE

If your unit is equipped with a water heater, fill the cup once after switching

the unit on to start the heating. Notice that when using the water heater, the

water temperature can rise up to 46°C.

NOTE

If your dental unit is equipped with the optional Suction Tube Cleaning

System (STCS), make sure that the STCS box cover is closed when

switching the unit on.

15  Switching unit on and off

User's manual

Planmeca Compact i 81

Summary of Contents for Compact i Touch v2



























































































































































































































































































































Reviews:

No comments