Planmeca Compact i Touch v2 User Manual Download Page 197

Page: 197 / 314

The pop-up window closes and the new values are displayed on the

control panel.

25.5 Timer settings

About this task

Up to six timer settings can be programmed into the timer memory.

Steps

1. Press Program.

2. Press Timer.

A pop-up window opens.

3. Press the timer that you want to adjust.

A new pop-up window opens.

4. Adjust the length of the timer.

The minimum value is 5 sec. and the maximum 20 min. The adjustment

step is 5 sec.

5. Press OK.

The pop-up window closes.

25.6 Bowl rinse and cup fill

25.6.1 Adjusting cup fill and bowl rinse flow rates

The flow rates of the bowl flush and cup fill can be adjusted with the two

black knobs located inside the dental unit.

25 Programming

User's manual

Planmeca Compact i 187

Summary of Contents for Compact i Touch v2



























































































































































































































































































































Search results

Summary of Contents for Compact i Touch v2

Reviews:

Planmeca Compact i Touch v2, User Manual, Page: 197 / 314

Search results

Summary of Contents for Compact i Touch v2

Reviews: