Planmeca Compact i Touch v2 User Manual Download Page 172

Page: 172 / 314

NOTE

The foot control can be configured so that you push the left-side knob down

to change the scaler mode. Contact your Planmeca dealer.

NOTE

Check the scaler mode symbol on the control panel to verify that pushing the

left-side knob down activates the correct function.

23.8.7 Instrument light

When the instrument light is on, the indicator light on the control panel button

is green.
Control panel: Press Instrument light to switch the instrument light on/off.

NOTE

The foot control can be configured so that you push the left-side knob down

to switch the instrument light on/off. Contact your Planmeca dealer.

NOTE

Check the indicator light on the control panel to verify that pushing the left-

side knob down activates the correct function.

The instrument light intensity can be programmed, see section "Instrument

light" on page 178.

23.9 Planmeca Lumion Plus polymerisation light

CAUTION

The polymerisation light generates optical radiation and proper safety

measures should be taken when using the instrument. For detailed

information, please refer to OEM documentation.

CAUTION

Do not use the polymerisation light on patients with cardiac pacemakers.

The polymerisation light can cause disturbance on the pacemaker’s function.

NOTE

When the polymerisation light is taken from the holder in the instrument

console and returned to it, the operating light's composite mode is switched

on. This feature is configurable; contact your Planmeca dealer.

To start the polymerisation cycle, first select the desired curing mode by

pressing the navigation button on the handpiece. Then, start the

polymerisation cycle by pressing the start button on the handpiece.
The polymerisation cycle can be interrupted by pressing the start button

again.

23 Operating instruments

162 Planmeca Compact i

User's manual

Summary of Contents for Compact i Touch v2



























































































































































































































































































































Search results

Summary of Contents for Compact i Touch v2

Reviews:

Planmeca Compact i Touch v2, User Manual, Page: 172 / 314

Search results

Summary of Contents for Compact i Touch v2

Reviews: