Planmeca Compact i Touch v2 User Manual Download Page 188

Page: 188 / 314

NOTE

If you disable the sterile water mode for an instrument that uses sterile

water, the flow rate for sterile water 1 and 2 automatically changes to

0%.

5. Press OK.

The pop-up window closes.

25.4.4 Automatic chip blow

About this task

NOTE

The type of manual chip blow does not depend on the type of the automatic

chip blow, but is dry as a factory default. The manual chip blow can be set to

be dependent on programming, contact your Planmeca dealer.

Steps

1. Activate the instrument.
2. Press Program.

3. Press Chip blow.

A pop-up window opens.

4. Adjust the flow rates for water and air.

The minimum value of both parameters is 0 (no flow) and maximum 100.

The adjustment step is 1 in the value range 0 - 35% and 5 in the value

range 35 - 100%.

5. Press OK.

The pop-up window closes and the new values are displayed on the

control panel.

25.4.5 Instrument light

Steps

1. Activate the instrument.
2. Press Program.

25 Programming

178 Planmeca Compact i

User's manual

Summary of Contents for Compact i Touch v2



























































































































































































































































































































Search results

Summary of Contents for Compact i Touch v2

Reviews:

Planmeca Compact i Touch v2, User Manual, Page: 188 / 314

Search results

Summary of Contents for Compact i Touch v2

Reviews: