Planmeca Compact i Touch v2 User Manual Download Page 136

Page: 136 / 314

Steps

1. Open the

Solanna Vision window in the dental unit.

For instructions, see section "Activating camera from dental unit" on

page 124.

2. Select the camera by pressing the corresponding camera button.

Right camera (as seen from behind the camera)

selected. Press to unselect.

Left camera (as seen from behind the camera)

selected. Press to unselect.

3. Select the level of digital zoom by pressing the corresponding button.

The options are 1x, 2x and 5x zoom. The selected option is indicated by

a blue button.

22.7.2.2 Adjusting video settings

Steps

1. Open the

Solanna Vision window in the dental unit.

For instructions, see section "Activating camera from dental unit" on

page 124.

2. In the

Solanna Vision window, press Settings.

22 Operating dental unit

126 Planmeca Compact i

User's manual

Summary of Contents for Compact i Touch v2



























































































































































































































































































































Search results

Summary of Contents for Compact i Touch v2

Reviews:

Planmeca Compact i Touch v2, User Manual, Page: 136 / 314

Search results

Summary of Contents for Compact i Touch v2

Reviews: