manualshive.com logo in svg

Planmeca Compact i Touch v2, User Manual, Page: 242 / 314

Share
Download
Planmeca Compact i Touch v2 User Manual Download Page 242

The bowl can also be removed and washed in the dishwasher if required. To

remove the bowl, do as follows:
1. Turn the bowl and the cup fill tube away from above the cuspidor.
2. Remove the bowl filter parts.
3. Push the bowl fastening clip carefully down and
4. rotate the bowl counter-clockwise.
5. Lift the bowl slightly upward and remove it by pulling it horizontally.

Replace the bowl in reverse order.

NOTE

The cover cap of the filter makes the removal of the filter easier, but the filter

can also be used without the cover cap.

28.4.2 Instrument flushing holder

The instrument flushing holder can be lifted away from its position.

28  Cleaning and disinfection

232 Planmeca Compact i

User's manual

Summary of Contents for Compact i Touch v2



























































































































































































































































































































Reviews:

No comments