Planmeca Compact i Touch v2 User Manual Download Page 278

Page: 278 / 314

Power supply related error messages

ERROR

CODE

EXPLANATION

E16.3

Scaler electronics slot does not match with scaler hose

connection.
Check scaler electronics connection.

E16.4

Other instrument than scaler is connected to slot where scaler

electronics is.
Check scaler electronics connection.

E17

Power Supply related error messages.

E18

Power Supply related error messages.

31.3.3 Control panel related error messages

Control panel related error messages

ERROR

CODE

EXPLANATION

E19.1

Control panel in branch 1 is of new type.
Update MCB software.

E19.2

Control panel in branch 2 is of new type.
Update MCB software.

E20.1

Control panel 1 button stuck.
Control panel button is stuck during self test.

E20.2

Control panel 2 button stuck.
Control panel button is stuck during self test.

E21

Control panel related error messages.

E22

Control panel related error messages.

31.3.4 Instrument related error messages

Instrument related error messages

ERROR

CODE

EXPLANATION

E23

Polymerisation light bulb has blown or is not properly attached

to socket.

E23.1

Instrument overtemperature error.
Check the instrument handpiece and let the instrument cool

down.

E23.2

Micromotor error; phase missing.
Check that the micromotor and hose are connected properly.

E23.3

Instrument undervoltage error.

E23.4

Instrument power protection error.

E23.5

Instrument EEPROM error.

31 Help and error messages

268 Planmeca Compact i

User's manual

Summary of Contents for Compact i Touch v2



























































































































































































































































































































Search results

Summary of Contents for Compact i Touch v2

Reviews:

Planmeca Compact i Touch v2, User Manual, Page: 278 / 314

Search results

Summary of Contents for Compact i Touch v2

Reviews: