Planmeca Compact i Touch v2 User Manual Download Page 187

Page: 187 / 314

2. Press Program.

3. Press Instrument spray.

A pop-up window opens.

4. Adjust the flow rates for water and air.

Scaler: Adjust the flow rates for water 1 and water 2.
The minimum value of all parameters is 0 (no flow) and maximum 100.

The adjustment step is 1 in the value range 0 - 35% and 5 in the value

range 35 - 100%.

5. Press OK.

The pop-up window closes and the new values are displayed on the

control panel.

25.4.3 Enabling/disabling sterile water mode

About this task

If the dental unit is equipped with the Planmeca Sterile water system or

Steripump, enable/disable the sterile water mode as described below.

NOTE

The flow rates for sterile water can not be adjusted by the user.

Steps

1. Activate the instrument.
2. Press Program.

3. Press Instrument spray.

A pop-up window opens.

4. Toggle the Sterile water button to enable/disable the sterile water mode.

A grey button means that the sterile water mode is disabled, and a blue

button that it is enabled.

25 Programming

User's manual

Planmeca Compact i 177

Summary of Contents for Compact i Touch v2



























































































































































































































































































































Search results

Summary of Contents for Compact i Touch v2

Reviews:

Planmeca Compact i Touch v2, User Manual, Page: 187 / 314

Search results

Summary of Contents for Compact i Touch v2

Reviews: