Planmeca Compact i Touch v2 User Manual Download Page 200

Page: 200 / 314

4. Push the foot control pedal down. The cup filling time will first be set to 2

seconds and will start to increase after pushing the foot control pedal for

2 seconds. The pedal can be released and then pushed again, and the

time continues to increase. Continue until the cup is filled to the desired

level.

5. Press Program.

25.7 Planmeca Solanna and Planmeca Solanna Vision operating lights

25.7.1 Intensity

About this task

NOTE

The light intensity can also be adjusted from the operating light, see sections

"Adjusting intensity of operating light" on page 119 and "Adjusting intensity

of operating light in composite mode" on page 120.

When you have signed in to the dental unit with your own user name, all

changes you make to the light mode settings and then save, are saved to

your user profile. This means that whenever you sign in to the dental unit,

you will use your last saved light mode settings.

Steps

1. Press Program.

2. Press Operating light or Composite mode. Both buttons open the same

pop-up window.

25 Programming

190 Planmeca Compact i

User's manual

Summary of Contents for Compact i Touch v2



























































































































































































































































































































Search results

Summary of Contents for Compact i Touch v2

Reviews:

Planmeca Compact i Touch v2, User Manual, Page: 200 / 314

Search results

Summary of Contents for Compact i Touch v2

Reviews: