Planmeca Compact i Touch v2 User Manual Download Page 310

Page: 310 / 314

34.4 Planmeca Compact i dental unit water consumption

Part

Water consumption

Bowl

The flow rate is approx. 2.5 litres (0.66 gallons)

per minute. The flow rate can be configured.

Cup fill

The cup filling is adjusted for the size of cup you

use.

Syringe

The flow rate is approx. 0.1 litres (0.03 gallons)

per minute.

Handpieces

The flow rate is approx. 0.05 litres (0.01 gallons)

per minute.

Suction system

The flow rate is approx. 0.4 litres (0.11 gallons) /

minute when the suction is on, and the amount

depends on which suction system is used in the

dental unit. The water flow keeps the suction

system clean when in use.

Suction system

cleaning cycle

Cleaning is done once a day and uses 2.5 litres

(0.66 gallons) of water.

34 Technical information

300 Planmeca Compact i

User's manual

Summary of Contents for Compact i Touch v2



























































































































































































































































































































Search results

Summary of Contents for Compact i Touch v2

Reviews:

Planmeca Compact i Touch v2, User Manual, Page: 310 / 314

Search results

Summary of Contents for Compact i Touch v2

Reviews: