Planika MONROE 900 F, Installation Manual

Page: 14 / 68

Copyright Planika Sp. z o.o. www.planikafires.com IG0139#02 30.07.2018 14
5.5.
Device positioning
Before connecting the device to gas and concentric flue system, it should be thoughtful to choose the place
of its detention and place it in such way, so that the concentric flue system have the minimum number of
bends. This will ensure adequate chimney draft and adequate circulation inside the combustion chamber. It is
also important that after you connect the fireplace to a gas pipe, flexible connecting wires are not exposed to
excessive twisting and are located away from hot parts.
By acceding to the installation of the unit, particular attention should be paid to:

The unit was located at a minimum distance of 1m from objects or flammable materials.

The device was minimum 50 mm away from the non-flammable housing elements and the minimum
distance between the device and the back wall was not less than 50 mm.
Picture 1 - The minimum required distance from the unit

Outlet pipes were installed according to the manual.

The wall, before which the device will be placed at, was made of non-flammable and heat-resistant
material.

Do not use any additional insulation, or wrap the device in any other material.

The unit was in a stable position and was placed on a flat leveled base. This will be particularly
important if the adjustable feet attached to device, will be extended to its maximum height, or when
the device is sited in additionally elevated foundation.
WARNING! Precise leveling the ground and the
body of the fireplace will ensure the stability of the device and ensure the tightness of the combustion
chamber.

Minimum structural dimensions of the fireplace housing have been preserved.

Gas pipeline together with the installed gas valve was supplied at the place of installation.

Create an opening for the needs of concentric air combustion system with the following diameters:
o
pipe di50 mm for the needs of the channel passing through combustible material;
o
pipe di200 mm for needs of the channel passing through combustible material;