50-258
Usage Guide:
This command configures circuit-id alone for each port, the priority is higher than pppoe intermediate-agent
identifier-string command.
Example:
Configure circuit-id as abcd/efgh on port ethernet1/3 of vlan3.
Switch(config-if-ethernet1/3)#pppoe intermediate-agent circuit-id abcd/efgh
After port ethernet1/3 of vlan3 receives PPPoE packet, circuit-
id value of the added vendor tag as ”abcd/efgh”.
50.5 pppoe intermediate-agent delimiter
Command:
pppoe intermediate-agent delimiter <WORD>
no pppoe intermediate-agent delimiter
Function:
Configure the delimiter among the fields in circuit-id and remote-id, the no command cancels the configuration.
Parameter:
<WORD>: the delimiter, its range is (#|.|,|;|:|/|space).
Command Mode:
Global mode
Default:
The fields is comparted with
’\0’.
Usage Guide:
After configuring the delimiter, the added fields of circuit-id and remote-id use the configured delimiter to compart.
Notice: The global
pppoe intermediate-agent
function must be enabled.
Example:
Configure the delimiter.
Switch(config)#pppoe intermediate-agent delimiter space