Planet Networking & Communication SGS-6340-16XR Command Manual Download Page 738

Page: 738 / 984

41-186

Command mode:

Global Mode.

Default:

The default value is 10 seconds.

Usage Guide:

Default value is recommended.

Example:

Setting the silent time to 120 seconds.

Switch(config)#dot1x timeout quiet-period 120

41.25 dot1x timeout re-authperiod

Command:

dot1x timeout re-authperiod <

seconds>

no dot1x timeout re-authperiod

Function:

Sets the supplicant re-authenticatio

n interval; the “

no dot1x timeout re-authperiod

” command restores the default

setting.

Parameters:

<seconds>

is the interval for re-authentication, in seconds, the valid range is 1 to 65535.

Command mode:

Global Mode.

Default:

The default value is 3600 seconds.

Usage Guide:

dot1x re-authentication

must be enabled first before supplicant re-authentication interval can be modified. If

authentication is not enabled for the switch, the supplicant re-authentication interval set will not take effect.

Summary of Contents for SGS-6340-16XR

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SGS-6340-16XR

Reviews:

Planet Networking & Communication SGS-6340-16XR, Command Manual, Page: 738 / 984

Search results

Summary of Contents for SGS-6340-16XR

Reviews: