1-53
Command mode:
Global Mode
Default:
The default prompt is relative with the switch.
Usage Guide:
With this command, the user can set the CLI prompt of the switch according to their own requirements.
Example:
Set the prompt to “Test”.
Switch(config)#hostname Test
Test(config)#
1.1.16 ip host
Command:
ip host
<hostname> <ip_addr>
no ip host {
<hostname>
|all}
Function:
Set the mapping relationship between the host and IP address; the “no ip host” parameter of this command will
delete the mapping.
Parameter:
<hostname>
is the host name, up to 64 characters are allowed;
<ip_addr>
is the corresponding IP address for the
host name, takes a dot decimal format;
all
is all of the host name.
Command mode:
Global Mode
Usage Guide:
Set the association
between host and IP address, which can be used in commands like “
ping
<host>
“.