Planet Networking & Communication SGS-6340-16XR, Command Manual, Page: 208 / 984

11-207
Chapter 11 Commands for EFM OAM
11.1 clear ethernet-oam
Command:
clear ethernet-oam [interface {ethernet |} < IFNAME >]
Function:
Clear the statistic information of packets and link event on specific or all ports for OAM.
Parameters:
< IFNAME >, the name of the port needs to clear OAM statistic information
Command Mode:
Admin mode
Default:
N/A.
Usage Guide:
N/A.
Example:
Clear the statistic information of OAM packets and link event on all ports.
Switch(config)#clear ethernet-oam
11.2 debug ethernet-oam error
Command:
debug ethernet-oam error [interface {ethernet |} < IFNAME >]
no debug ethernet-oam error [interface {ethernet |} < IFNAME >]
Function:
Enable the debugging of OAM error information, no command disables it.
Parameters:
< IFNAME >: name of the port that the debugging will be enabled or disabled.