1-106
Command Mode:
Global Mode
Parameter:
<group-string
>
group name which includes 1-32 characters
NoauthNopriv
Applies the non recognizing and non encrypting safety level
AuthNopriv
Applies the recognizing but non encrypting safety level
AuthPriv
Applies the recognizing and encrypting safety level
read-string
Name of readable view which includes 1-32 characters
write-string
Name of writable view which includes 1-32 characters
notify-string
Name of trappable view which includes 1-32 characters
<num-std>
is the access-class number for standard numeric ACL, ranging between 1-99;
<name>
is the access-class name for standard ACL, the character string length is ranging between 1-32;
<ipv6-num-std>
is the access-class number for standard numeric IPv6 ACL, ranging between 500-599;
<name>
is the access-class name for standard IPv6 ACL, the character string length is ranging between 1-32.
Usage Guide:
There is a
default view “v1defaultviewname” in the system. It is recommended to use this view as the view name of
the notification. If the read or write view name is empty, corresponding operation will be disabled.
Example:
Create a group CompanyGroup, with the safety level of recognizing and encrypting, the read viewname isreadview,
and the writing is disabled.
Switch (config)#snmp-server group CompanyGroup AuthPriv read readview
Delete group
Switch (config)#no snmp-server group CompanyGroup AuthPriv
1.4.17 snmp-server host
Command:
snmp-server host
{
<host-ipv4-address> | <host-ipv6-address>
} {v1 | v2c | {v3 {NoauthNopriv | AuthNopriv |
AuthPriv}}} <
user-string
>
no snmp-server host
{
<host-ipv4-address> | <host-ipv6-address>
} {v1 | v2c | {v3 {NoauthNopriv |
AuthNopriv | AuthPriv}}} <
user-string>