Planet Networking & Communication SGS-6340-16XR Command Manual Download Page 260

Page: 260 / 984

15-22

Command Mode:

Port mode

Default:

Port does not forward any protocol packets across the tunnel.

Usage Guide:

Disable uldp function on the port before configuring this command.

Example:

Configure Ethernet 4/5 to forward uldp packets across the tunnel.

Switch(Config)#in ethernet 4/5

Switch(Config-if-ethernet 4/5)#bpdu-tunnel uldp

15.5 bpdu-tunnel lacp

Command:

bpdu-tunnel lacp

no bpdu-tunnel lacp

Function:

Configure the specified port to forward lacp packets across the tunnel, the no command cancels the operation.

Parameter:

None.

Command Mode:

Port mode

Default:

Port does not forward any protocol packets across the tunnel.

Usage Guide:

Disable lacp function on the port before configuring this command.

Summary of Contents for SGS-6340-16XR

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SGS-6340-16XR

Reviews:

Planet Networking & Communication SGS-6340-16XR, Command Manual, Page: 260 / 984

Search results

Summary of Contents for SGS-6340-16XR

Reviews: