Planet Networking & Communication SGS-6340-16XR Command Manual Download Page 129

Page: 129 / 984

2-128

Usage Guide:

When using this command, if the new file name is not used as that of any existing directory or file, the rename

operation can be done, or a prompt will indicate its failure.

Example:

Change the name of file “nos.img” in the current working directory to “nos-6.1.11.0.img”.

Switch# rename nos5.img nos-6.1.11.0.img

Rename flash:/nos5.img to flash:/nos-6.1.11.0.img ok

！

2.9 rmdir

Command:

rmdir <

directory

Function:

Delete a sub-directory in the designated directory on a certain device .

Parameters:

<directory>

is the sub-directory name, a sequence of consecutive characters whose length ranges from 1 to 80.

Command Mode:

Admin Mode.

Default Settings:

None.

Usage Guide:

The directory to be deleted should exist and be empty, that is, all files in the directory should be deleted before

deleting it, or an error prompt will be displayed.

Summary of Contents for SGS-6340-16XR

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SGS-6340-16XR

Reviews:

Planet Networking & Communication SGS-6340-16XR, Command Manual, Page: 129 / 984

Search results

Summary of Contents for SGS-6340-16XR

Reviews: