Planet Networking & Communication SGS-6340-16XR Command Manual Download Page 176

Page: 176 / 984

7-175

Usage Guide:

Use this command to display all kinds of event information.

Example:

Display event information.

Switch#debug uldp event

7.4 debug uldp fsm interface ethernet

Command:

debug uldp fsm interface ethernet

<IFname

no debug uldp fsm interface ethernet <

IFname

Function:

To enable debugging information for ULDP for the specified interface. The no form of this command will disable the

debugging information.

Parameters:

<IFname

is the interface name.

Command Mode:

Admin Configuration Mode.

Default:

Disabled by default.

Usage Guide:

This command can be used to display the information about state transitions of the specified interfaces.

Example:

Print the information about state transitions of interface ethernet 1/1.

Switch#debug uldp fsm interface ethernet 1/1

Summary of Contents for SGS-6340-16XR

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SGS-6340-16XR

Reviews:

Planet Networking & Communication SGS-6340-16XR, Command Manual, Page: 176 / 984

Search results

Summary of Contents for SGS-6340-16XR

Reviews: