25-91
Usage Guide:
The LSA ages with time in the layer 3 switches, but not in the network transmitting process. By adding the
transit-delay
prior to sending the LSA, the LSA will be sent before aged.
Example:
Set the LSA transmit delay of interface vlan1 to 3 seconds.
Switch#config terminal
Switch(config)#interface vlan 1
Switch(Config-if-Vlan1)#ip ospf transmit-delay 3
25.40 key
Command:
key <
keyid
>
no key
<keyid>
Function:
This command is for managing and adding keys in the key chain. The “
no key
<keyid>
” command deletes one key.
Parameter:
<
keyid
>
is key ID, ranging between 0-2147483647.
Command Mode:
keychain Mode and keychain-key Mode
Usage Guide:
The command permits entering the keychain-key mode and set the passwords corresponding to the keys.
Example:
Switch#config terminal
Switch(config)#key chain mychain
Switch(config-keychain)#key 1
Switch(config-keychain-key)#
Relevant Commands:
key chain, key-string, accept-lifetime, send-lifetime