41-188
Function:
Enable the 802.1x unicast passthrough function of switch; the no operation of this command will disable this function.
Command mode:
Global Configuration Mode.
Default:
The 802.1x unicast passthrough function is not enabled in global mode.
Usage Guide:
The 802.1x unicast passthrough authentication for the switch must be enabled first to enable the 802.1x unicast
passthrough function, then the 802.1x function is configured.
Example:
Enabling the 802.1x unicast passthrough function of the switch and enable the 802.1x for port 1/1.
Switch(config)#dot1x enable
Switch(config)# dot1x unicast enable
Switch(config)#interface ethernet1/1
Switch(Config-If-Ethernet1/1)#dot1x enable
41.28 show dot1x
Command:
show dot1x [interface <
interface-list
>]
Function:
Displays dot1x parameter related information, if parameter information is added, corresponding dot1x status for
corresponding port is displayed.
Parameters:
<interface-list>
is the port list. If no parameter is specified, information for all ports is displayed.
Command mode:
Admin and Configuration Mode.
Usage Guide:
The dot1x related parameter and dot1x information can be displayed with “show dot1x” command.