25-96
ibm
, Realize through ibm ABR;
shortcut
, Specify a shortcut-ABR;
standard
, Realize with standard
（
RFC2328
）
ABR.
Default:
Cisco by default.
Command Mode:
OSPF protocol mode
Usage Guide:
For Specifying the realizing type of abr. This command is good for interactive operation among different OSPF
realizing method and is especially useful in the multiple host environment.
Example:
Configure abr as standard.
Switch#config terminal
Switch(config)#router ospf 100
Switch(config-router)#ospf abr-type standard
25.47 ospf router-id
Command:
ospf router-id
<address>
no ospf router-id
Function:
Specify a router ID for the OSPF process. The “
no ospf router-id
” command cancels the ID number.
Parameter:
<
address
>,
IPv4 address format of router-id.
Default:
No default configuration.
Command Mode:
OSPF protocol mode