1-65
Usage Guide:
Check the current usage of memory resource by
show memory usage
command. Only
the
chassis switch
uses
slotno
parameter which is used to show the memory usage rate of card on the specified slot, if there is no parameter,
the default is current card.
Example:
Show the current usage rate of the memory.
Switch#show memory usage
The memory total 128 MB, free 58914872 bytes, usage is 56.10%
1.1.34 show privilege
Command:
show privilege
Function:
Show privilege of the current users.
Parameter:
None.
Command Mode:
All configuration modes
Example:
Show privilege of the current user.
Switch(Config)#show privilege
Current privilege level is 15