Pitney Bowes relay 3000, User Manual

Page: 2 / 120

Statement of FCC Compliance
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause interference to radio communications. Operation of this equipment
in a residential area is likely to cause interference, in which case the user will be
required to correct the interference at his own expense. Use only a shielded interface
cable to operate this equipment with a printer or other peripheral device.
CAUTION: Changes or modifications to this equipment not expressly approved by
the party responsible for compliance (Pitney Bowes) could void the user’s authority
to operate the equipment.
SV63138 Rev. A August 1, 2015
©2006, 2015 Pitney Bowes Inc. All rights reserved. This guide may not be
reproduced in whole or in part in any fashion or stored in a retrieval system of
any type or transmitted by any means, electronically or mechanically, without
the express, written permission of Pitney Bowes.
We have made every reasonable effort to ensure the accuracy and usefulness
of this manual; however, we cannot assume responsibility for errors or omissions
or liability for the misuse or misapplication of our products.
Due to our continuing program of product improvement, equipment and
material specifications as well as performance features are subject to change
without notice. Your inserter system may not have some of the features
described in this book.
E-Z Seal is a registered trademark of Pitney Bowes Inc. ENERGY STAR is a
registered trademark of the United States Environmental Protection Agency.
It is certified that the equipment complies with all applicable Directives
of the European Union. The touch screen and main inserting system
contain a radio frequency transmitting device that is in compliance with
the European Union’s Directive 1999/5/EC on Radio Equipment and
Telecommunications Terminal Equipment and the mutual recognition of
their conformity.
LED SAFETY
LED emission according to EN 62471
Relay 3000/4000 is UL approved (US) and CUL approved (Canada).