Pitney Bowes relay 3000, User Manual

Page: 58 / 120

3 ● Run a Job
3-8 SV63138 Rev. A
Adjust and Load the Envelope Feeder
The envelope feeder feeds the outer envelope for the inserting job.
1. Press the envelope feeder
loading switch to lower the
feeder tray.
2. Use the side guide adjustment
knob to adjust the side guides
to the
width
of the envelopes.
Once adjusted, back-off the
adjustment knob 1/4 turn.
This sets the correct clearance
between the guides and envelopes.
3. Take the stack of envelopes;
aerate and fan it to ensure that
individual envelopes are not
stuck together.
4. Place the stack of envelopes
into the feeder with the flap
side UP and flap LAST .
5. Press the envelope feeder
loading switch again to raise
the envelope stack to the
normal feeding position.