Pitney Bowes relay 3000, User Manual

Page: 31 / 120

Program a Job ● 2
2-5 SV63138 Rev. A
Program a Job
Log In
Log in with Supervisor level access.
1. Tap the
icon twice at the bottom of the touch screen desktop.
2. When the Operator List displays select Supervisor username or an
Operator not in use (typically indicated as Operator 1 - Operator 10).
3. Tap .
4. To launch the keyboard, tap the icon in the bottom right corner of
the screen and type the Supervisor password ( 71 ) in the field.
5. Tap . The main control screen opens.
6. Tap in the upper right corner to close the keyboard.
Enter Supervisor Access Code
1. Tap the Setup button. The Enter Access Code field displays over the
inserter model on the touch screen display.
2. Tap the icons to increase or decrease to 71 .
3. Tap to accept the access code and advance to the job settings.
Select the Job Number (New or Existing Job)
When prompted for the job number, follow these steps to select or create
the job. You can select an existing job and overwrite its current settings or
you can select an unused job and program new settings.
1. Use the
icons to scroll through the job numbers until you find
the desired job number. ( To identify an unused job, scroll through the
jobs until there are no setup symbols displayed on the screen.)
2. Tap to accept the job number and advance to the first setting.
NOTE: If you use an existing job number, the old settings will be overwritten by the
new settings you are adding.